Company News
Home > News > Company News

G3-PLC Communication Module

Pulished on Nov. 15, 2020

G3-PLC Communication Module


In the previous article, I took you to understand the history of communication module and made a brief description of the wireless communication module.Today and talk about G3-PLC communication module.

 

First take you to understand what is G3-PLC communication.First of all, there is the G3 standard. For smart grid standards, PRIME and G3 are relatively famous. Among them, G3 standard is an international communication standard jointly developed by Meixin and Edf.PLC communication, namely power line carrier communication, power line carrier communication refers to the use of existing transmission lines or distribution lines as a signal transmission medium of communication.Because of its wide coverage, no special wiring and other advantages, is becoming a very attractive means of communication.

 

The function of PLC communication module is that when the COMMUNICATION port of PLC itself is not enough, the PLC may need to communicate with a number of third-party instruments.At this time, communication module is needed. There are many types of communication module, the common ones are serial port module (RS232, RS485, RS422) and Ethernet communication module.

 

The following is to recommend a communication module:

G3-PLC-000 (S), a single-phase power line carrier module using narrowband crossover OFDM technology, conforms to SGCC 2013 related standards.The carrier bandwidth can be extended to 2MHz and can be used as a carrier meter or as a power line communication between a type I collector and a concentrator.(PS: The high speed, robustness, compatibility and application layer design characteristics of G3-PLC specification promote the construction of smart grid and the development of power line narrowband communication.)

 

1. Support DL/T645-2007 communication protocol, transparent transmission mode, large amounts of data (DL/T645 column) transmission of up to 196 bytes

2. Support serial transmission rate adaptive to realize automatic matching 2400 BPS to 9600 BPS.

3. Boot active reading table (table).

4.Support rapid network, automatic login nodes, active event reporting capabilities.

5.OFDM orthogonal frequency division multiplexing, extended frequency to 2 MHZ.

6.Support 6 lowpan/IPv6 network layer.

7.Distributed network architecture, routing forwarding support grid relay function, routing depth of 15.

8.Adaptive grid 50 hz, 60 hz system, support the zero transmission.

9.Support either AES128 hardware encryption.

 

Thank you for your support. For those who are interested in this communication module, please visit our website for more information on https://www.ivy-metering.com/communication-module/g3-plc.html


Share: