Thailand Market
Home > Product > Geography Oriented > Thailand Market
  • MD0630T01A-Z IEC62955 Integrated 6mA DC 30mA AC Type B Leakage Current Protection Built-in RCD for EV Charger
  • MD0630T01A-Z IEC62955 Integrated 6mA DC 30mA AC Type B Leakage Current Protection Built-in RCD for EV Charger
  • MD0630T01A-Z IEC62955 Integrated 6mA DC 30mA AC Type B Leakage Current Protection Built-in RCD for EV Charger

MD0630T01A-Z IEC62955 Integrated 6mA DC 30mA AC Type B Leakage Current Protection Built-in RCD for EV Charger

Share :
Product parameters

Product Introduction

IVY offers MD0630T01A-Z for monitoring and/or providing shock protection and fault protection on AC and DC installations and for EV charging applications. MD0630T41A is a RCD sensor specifically developed for EV-charging providing all-current sensitivity. The sensor can issues an alarm signal in case of hazardous electrical faults (DC and AC). It has the characteristics of accurate measurement, small size and integration. The RCD sensor can be set separately for AC and DC leakage and has a digital output function. MD0630T41A is an automotive grade leakage current sensor from IVY also called residual current monitoring (RCM), residual current detection (RCD), differential current sensor, leakage current detector and fault current sensor. Type A, B and B+, dedicated to detect to DC, AC and DC+AC leakage current measurement. The MD0630T41A can monitor DC (6mA) and AC (30mA) residual currents, it is connected in series with the AC supply to an EV and will provide a signal output if a DC current ≥ 6mA DC flows in the circuit.  In addition, our delivery time is also guaranteed.


Product Description

This product is fully compliant with TUV/CE-EMC 
The MD0630T01A-Z is a residual current monitor intended for the detection of DC and AC residual currents in 50Hz/60Hz AC installations.
The MD0630T01A-Z is primarily intended for use in Mode 2 Electric Vehicle In-Cable Control and Protection Devices (IC-CPDs) and Mode 3 Wallbox Charger, to disconnect the supply to the Electric Vehicle under an AC or DC residual current fault condition.
The MD0630T01A-Z may also be used to detect DC or AC residual currents in DC, single phase or multiphase installations.
The MD0630T01A-Z is a compact solution designed to be mounted directly onto a PCB.


MD0630T41A IEC62955 EV Charger RCD 6mA DC 30mA AC Residual Current Monitoring Sensor with 5V 12V Output


Product Features

1. Complies with the DC and AC protection requirements of IEC62752 or IEC62955

2. Small Size; Integration Design; Horizontal Type, Pin Mount

3. AC DC Leakage Data Readable; Alarm Value Programmable; 3 Way Alarm Outputs; Digital Output

4. UART Comm, with Modbus Protocol; Standard: EN 61000-6-3:2007+A1, EN IEC 61000-6-1:2019

5. Certification: TUV(IEC62955/IEC62752/IEC61851-1/IEC62196); UL2231-1/UL2231-2; IS17017; CE-EMC 

6. Type B RCD/RCM for EV Charger Protection; Electrical Safety at Low Cost (Compared to Type B RCCB)

7. Robust Mechanical and Electrical Design for Harsh Environmental Conditions


MD0630T41A Compact EVSE AC DC Fault Detection Residual Current Sensor RCD Transformer with UART


Product Parameters

  • Wide voltage input: 12V±20%

  • Measuring current range: DC current 2-15mA; AC current 3-100mA (default threshold: DC 6mA, AC 30mA)

  • Accuracy : at 25℃, DC±0,2mA, AC±0.3mA

  • Can read current value and set alarm current value

  • Three outputs: DC alarm, AC alarm, AC/DC alarm

  • Working environment temperature: -25℃~+80℃

  • Plastic case, small SIP package


Typical Application

  • Ground fault current detection

  • Solar inverter residual current 

  • Converter leakage current detection 

  • UPS and other power ground fault detection

  • Electric vehicle charging station

  • Single or 3 Phases differential current detection

  • Indusrtrail Automation, Smart Home, IOT Field, Power Distribution Cabinet